A friend of mine had tried to build a streetfighter based on a Suzuki Hayabusa GSXR1300R 1999. It had a gas flowed engine with barely any miles and four new pistons. He had a new wide swinging arm made to take a 300 section tyre that had a custom billet rear wheel. Along with some custom yokes, tank headlight dial and K4 seat unit it had the ingredients to be a superb bike.
However a lot of money and time later the Suzuki B-king came out and he bought one and put some of the parts from the project on the B-king and fell in love with it!
This left him with boxes full of original parts and an almost complete bike, this sat for a few years in various garages and he has finally decided to flog the lot clear out a load of space and move on before he has to start worrying about corrosion destroying all the parts.
This is where I come in I will take all the parts log what I have, price it and then pop all the bits up on ebay undercutting all the other parts up there to ensure it all goes quick!
PICS COMING UP SOON!!!!!!!
Heres a list of all the bits incase you are interested at all:
| Air filter |
| Head light and fairing |
| Steering Damper |
| Headlight brackets and fork clamp x4 |
| Bulb holder |
| Talon rear sprocket |
| Clutch Cover |
| Cam Chain x2 |
| Alternator Generator x2 |
| Negative Battery Wire |
| Cam chain tensioner/guide |
| Coolant hose connector x2 |
| Engine oil plug |
| Gear box bush x2 |
| Clutch Springs |
| Sprocket cover |
| Clutch slave cylinder |
| Stator cover |
| power commander |
| Cam set x2 |
| Clutch basket platesand hub clutch |
| Rear shock |
| Top Yoke |
| Suzuki GSXR K4 Brake light |
| Foot pegs |
| 2nd air system |
| Thermostat |
| LHS switch gear |
| Coolant hose |
| Cam chain tensioner x3 |
| Expansion Tank |
| Chain Guard |
| Throttle cable guide |
| Piston x4 |
| Fan |
| Fairing |
| Subframe |
| Clocks |
| Triumph Front Wheel |
| Brake Light |
| Suspension Linkage Heres my email you can contact me for pictures and prices. prmmotors@gmail.com |
No comments:
Post a Comment